Loading... Please wait...The Juki HZL-F600 Exceed is a full-sized computerized sewing and quilting machine built for quilters and garment sewers who want industrial-grade stitch quality at home, delivering 255 stitch patterns, box feed fabric control, and sewing speeds up to 900 stitches per minute. Juki applies decades of industrial sewing engineering to the HZL-F600, which shows in its steel feed dog, sensor-driven buttonholes, and automatic thread trimming. The Juki HZL-F600 ships with a wide extension table, a walking foot, and 10 snap-on presser feet, so you can piece, quilt, and sew garments the day it arrives.
Your seams stay smooth on light and heavy fabrics alike because box feed moves the feed dog in a square path instead of an oval, so the fabric never loses contact mid-stitch. This accurate feeding system is the core of the stitch quality that separates the Juki HZL-F600 from most domestic machines.
You get consistent buttonholes even across seam allowances because the sensor method measures the material as it sews. The Juki HZL-F600 offers 16 buttonhole types with cutting width adjustable in 3 steps.
You never reach for scissors between seams because the Juki HZL-F600 trims both needle and bobbin threads at the press of a button, or hands-free by pressing the heel side of the foot control.
You can manage large quilts comfortably because the 8-inch by 12 1/4 inch work surface runs 4 inches larger than the average workspace, and the included wide extension table expands the quilting area to 21 3/4 inches.
You can run long straight seams at up to 900 stitches per minute, then slow to 80 stitches per minute for precision work without losing needle piercing power.
You can free-motion quilt and free-hand embroider with stable thread tension because the feed dogs drop with a switch, and precise, immediate needle stop keeps your stitching where you intend it.
Buyers most often weigh the Juki HZL-F600 against the Juki TL-2010Q, a straight stitch quilting machine also carried at SewingMachinesPlus.com. The two machines solve different problems.
| Criteria | Juki HZL-F600 | Juki TL-2010Q |
|---|---|---|
| Stitch selection | The Juki HZL-F600 offers 255 stitch patterns and 4 lettering fonts. | The Juki TL-2010Q sews a straight stitch only. |
| Maximum speed | The machine sews up to 900 stitches per minute. | The machine sews up to 1500 stitches per minute. |
| Buttonholes | The Juki HZL-F600 sews 16 buttonhole types with sensor control. | The Juki TL-2010Q does not sew buttonholes. |
| Best fit | The Juki HZL-F600 suits sewers who quilt and also construct garments and home decor. | The Juki TL-2010Q suits dedicated quilters who prioritize piecing speed over stitch variety. |
| Sewing patterns | 255 |
| Lettering fonts | 4 |
| Buttonhole types | 16 |
| Maximum sewing speed | 900 SPM |
| Low speed sewing | 80 SPM |
| Stitch width control | Up to 7 mm |
| Stitch length control | Up to 5 mm |
| Presser foot lift with knee lever | Up to 12 mm |
| LCD display | 33 mm x 66 mm |
| Work surface | 8 in wide x 12 1/4 in long |
| Quilting area with extension table | 21 3/4 in |
| Weight | 21.6 lbs |
| Dimensions | 17.5 in (W) x 11.4 in (H) x 8.2 in (D) |
| US warranty | 5 years mechanical, 2 years electrical, 90 days adjustments |
The Juki HZL-F600 is built for quilting as well as garment sewing, with a patchwork foot, quilt guide, walking foot, and durable quilting foot included. The wide extension table stretches the quilting area to 21 3/4 inches, and feed dogs drop with a switch for free motion work.
The Juki HZL-F600 sews light- to heavyweight fabrics, and Juki specifically cites hemming denim jeans as a task it handles with ease. A special steel feed dog and improved presser foot construction give the machine its powerful feeding on thick layers.
The Juki HZL-F600 supports free motion quilting and free hand embroidery once you drop the feed dogs using the built-in switch. Stable thread tension keeps stitch quality consistent while you move the quilt freely.
The Juki HZL-F600 can sew light garment leather when paired with the included walking foot or Teflon foot. Heavier leathers such as saddle or upholstery hides call for an industrial machine instead.
The Juki HZL-F600 ships with 10 snap-on presser feet, a walking foot, a hard case, a wide extension table, a knee lift lever, a quilt guide, 4 bobbins, twin needles, an eyelet punch, spool caps in three sizes, an auxiliary spool pin, a seam ripper, and a special screwdriver. The presser feet include patchwork, open toe, Teflon, edge sewing, zipper, blindhem, overcasting, and both automatic and manual buttonhole feet.
The Juki HZL-F600 sews up to 900 stitches per minute at full speed. The machine also keeps full piercing power at low speeds down to 80 stitches per minute, which matters for precise topstitching and thick seam intersections.
The Juki HZL-F600 carries a US warranty of 5 years mechanical, 2 years electrical, and 90 days on adjustments for defects in material or workmanship. Outside the US, the warranty is 30 days for parts and labor.
Juki, the leader in industrial sewing, now delivers high technology to your home with the new F-Series for sewing and quilting. This machine will exceed your expectations by combining power and reliability with all the features even a pro will love. Get professional results with the sleek, easy-to-operate, multifunctional design developed for superior quilting, home decor, and garment construction. Take advantage of Juki's many years of industrial sewing expertise and expand your horizons with the HZL-F600 for sale.
These are the following key features of the Juki Exceed HZL-F600
In order to provide beautiful seams and outstanding feed performance, Juki adopted box feed system. The conventional feed mechanism is oval motion. This eliminates material shrinking and shifting. The accurate feeding system provides superior stitch quality for a variety of light to heavyweight fabrics.
Frequently used stitch patterns can be selected directly through the Direct Select mode: Piecing, Applique, Zigzag stitch for applique
No Fabric shrinkage even when sewing on extra lightweight materials
Capability to sew from light to heavy weight materials. Thick handles can be sewn with ease
HZL-F series has a wider underarm space; with a wider table, it is more enjoyable and comfortable to work with large projects.
With Stable Thread Tensions
The presser foot can be raised and lowered by the knee-lifting lever. Presser foot lift is up to 12 mm when the lever is used.
LED lights brighten the needle area and sewing area for better material handling.
F600 will create the width of select quilting stitch patterns automatically and at random. This will give your quilting project an enjoyable look without any hassle.
The new HZL-F series trims both needle and bobbin threads automatically by pressing the heel side of the foot controller. With this feature, you can concentrate on your project while the machine automatically cuts the thread.
The HZL-F series has powerful feeding thanks to a special steel feed dog and improved presser foot construction. Heavy material projects, such as hemming denim jeans, can be sewn with ease.
Using a unique sensor method, the HZL-F series sews beautiful buttonholes regardless of the type of material and overlapped sections.
16 Types of buttonholes are available for your needs
Now it is possible to adjust the cutting width of buttonholes in 3 steps.
The needle can be threaded quickly and easily.
Independent motor winds the bobbin thread.
The bobbin preparation is easy. Just follow the guide, and it is not necessary to pull up the bobbin thread.
Presser foot pressure can be adjusted for better sewing results according to the type of materials to be sewn.